Miscellaneous parts for gas stoves and Fireplaces.
Thermocouple, Robert-Shaw Pilot Assemblies
98900748
Thermopile, All Gas w/Robert-Shaw Pilot
Assemblies 98900752
Thermopile, generates millivolts to operate
Robert Shaw control valve. Mounts in pilot assembly. Used on Most Gas stoves and
fireplaces.
$30 [Order]
Thermocouple, S.I.T. Pilot Assemblies 93006518
Thermo-couple for all gas units utilizing the S.I.T. pilot assembly. Used on
Berkshire after #851198.
$10 [Order]
Thermo-generator (Thermo-pile), S.I.T. Pilot Assemblies
Piezo Igniter, All Gas Units
Fan Rheostat, Blower w/ Off Position, Gas
& Wood - Thick 250-00303 (old 100-00121)
Rheostat (with Off position), for convection blowers on gas appliances and
woodstove blowers. Has male connectors on the two wires. Set at approx.
65 Volts minimum (lowest speed). Does not include knob. Order knob #99300657 for
knob.
$20 [Order]
Blower, Convection, (Updated) High
Heat Motor and Blower
Gas 1993-95, Pellet 1990-96 98900729
This is a complete replacement fan for the Fasco "Snail-Shell" blower that was
used in pellet stoves & inserts 1990-96 and gas B-Vent stoves & inserts 1993-95.
This motor may be used to replace the original motor if it shuts down due to
high temperatures as in an insert application. Will not
work on a Foxfire (400) pellet stove..
$199
[Order]
Blower,
Convection, Motor Only, High-Heat, for Fasco
"Snail-Shell" Blower
98900728
This is a motor only
for the Fasco "Snail-Shell" blower that was used in pellet stoves & inserts
1990-96 and gas B-Vent
stoves & inserts 1993-95. This motor may be
used to replace the original motor if it shuts down due to high temperatures as
in an insert installation.
Will not fit the Foxfire 400
Freestanding stove
$130
[Order]
Blower, Convection, 96 & Up BVM / DVM
/ DVS, 95 Avt DV, 97 Pellet, etc.
250-00589 (old #98900755A)
Blower, Convection, 1996 & up gas (also 1995
Avanti DV) (Transflow Model No. QLN65/2400A20-3030LH-85ACW).
Does not include
mounting plate. Use mounting plate & rubber grommets from existing blower.
Also used with power heat duct kit and optional blower on FPX 35-B.
$125 [Order]